If you need a quick answer: aluminium commercial entrance doors are the go-to choice for high-traffic buildings because they are strong, low-maintenance, thermally efficient and available in configurations that meet UK building regulations. The right door depends on your traffic volume, security requirement, thermal target and whether fire rating is needed.

Read on for the full decision-making breakdown.

Why aluminium dominates commercial entrance design

Aluminium has become the standard frame material for commercial doorsets. The reason is straightforward – it does not warp, rot or corrode, and it holds up under the kind of constant daily use that would wear out a timber or uPVC frame in a fraction of the time.

Key performance advantages at a glance:

Factor Aluminium performance
Lifespan 40+ years with minimal maintenance
Thermal break availability Yes – meets Part L compliance
Fire rating Up to 120 minutes (tested to EN 1634)
Security testing PAS 24 compliant options available
Finish durability Powder coat resists fading and corrosion
Recyclability 100% recyclable at end of life

 

For commercial projects, those qualities are not optional extras, they are the baseline your specification needs to meet.

Choosing the right door type for your building

Your entrance configuration should match the footfall pattern and usage of the space. The main types used across commercial settings are:

Single and double leaf doors are suited to lower-traffic entrances where a manual push or pull is appropriate. They work well for office lobbies, side entrances and internal corridors.

Automatic sliding and swing doors are the preferred choice for high-footfall settings such as retail, healthcare, hospitality and transport hubs. Sensor-operated systems reduce contact points, support accessibility compliance and help with energy retention by limiting door-open time. LSF Commercial’s automatic aluminium door range covers sensor-operated entrance systems designed for these environments.

Pivot doors create a wide, contemporary entrance with a clean aesthetic and minimal visible hardware.

Fire-rated doorsets are required wherever your building regulations demand compartmentation. LSF Commercial supplies fire rated aluminium doors tested to 30, 60 and 120-minute ratings using Schüco ADS 80 FR systems and CONTRAFLAM fire-resistant glazing from Vetrotech Saint-Gobain.

Glazing options: what to specify and why

frameless door

The glazing unit in your entrance door affects thermal performance, acoustic control, security and the amount of natural light entering the space. Get this choice wrong and no frame specification will compensate for it.

  • Double glazing suits most standard commercial entrances and provides a solid baseline U-value.
  • Triple glazing is worth considering on north-facing or thermally demanding facades, with lower U-values achievable.
  • Laminated safety glass should be specified wherever the door could be subject to impact or where public safety is a consideration.
  • Solar control glass reduces heat gain and glare on south or west-facing entrances, reducing the load on air conditioning.
  • Acoustic glass is appropriate near busy roads, rail lines or other high-noise environments.
  • Fire-resistant glazed panels (such as CONTRAFLAM) are required where your doorset carries a fire rating and the design includes glazed lites.

Security ratings: what the certifications actually mean

PAS 24 is the benchmark security test for commercial and residential doorsets in the UK. A door that carries PAS 24 certification has been tested against forced entry attempts including crowbar attacks, drilling and frame manipulation. For new-build commercial projects, building regulations under Approved Document Q reference PAS 24 as the minimum security standard.

STS 202 provides an additional level of assurance for higher-security environments such as government buildings or data centres.

Secured by Design is a police-backed accreditation scheme. Specifying Secured by Design doors can support planning applications and insurance requirements for certain building types.

Thermal performance and Part L compliance

Since the update to Approved Document L in 2022, commercial buildings face tighter targets on fabric heat loss. Aluminium entrance doors need to meet U-value requirements as part of the overall building envelope calculation.

A thermally broken aluminium frame is now effectively standard for most commercial applications. Non-thermally broken frames have a significantly higher U-value and will create a cold bridge in the door frame, contributing to condensation and increased heat loss.

A thermally broken system separates the inner and outer aluminium profiles with a polyamide strip, dramatically reducing heat transfer through the frame itself. Combined with double or triple glazing, these systems can comfortably meet or exceed Part L targets.

Working with a specialist: what to expect from the process

access control entrance

A competent commercial aluminium door specialist will follow a structured process from survey to handover. At LSF Commercial, that means:

  1. Initial brief and site assessment – understanding how the door will be used, traffic volumes, security needs and any regulatory requirements.
  2. Technical design and specification – producing drawings, confirming U-values and certifications, and agreeing on finish and ironmongery.
  3. Made-to-measure fabrication – manufacturing to your exact dimensions using premium systems including Schüco profiles.
  4. Installation and commissioning – fitting, adjusting and handing over the doorset with all relevant documentation.

With over 40 years of experience delivering commercial aluminium systems across the UK, LSF Commercial works with architects, contractors and developers to specify and install entrance doors that perform from day one.

Get in touch with the LSF Commercial team to discuss your project requirements or call 01708 552 225.

Contact Us

If you'd like to find out more about working with LSF Commercial as your dedicated aluminium specialist, get in touch today. Whether you're working on a commercial refurbishment project, a new build development, or retail premises overhaul, we can help. Simply enter your details into the contact form and we'll get back to you as quickly as possible. With LSF Commercial as your project lead, you know you're in safe hands.






    Upload your images or drawings to help with your enquiry. Use the upload button to upload multiple documents (1.5mb maximum
    file size).


    By submitting your details you confirm that you agree to the storing and processing of your personal data by LSF Commercial as described in the privacy statement